Pitch ideas. Get them designed.
A community where ideas meet 3D designers. Pitch your concept, vote on the best ideas, and download free designs from talented creators.
#Automotive
Replacement parts, phone mounts, cup holder inserts, and car accessories
0 members
Created February 2026
Open
Toyota emblem for tesla
Love teslas but hate Elon. Could someone make front and back Toyota emblems for my 2022 model 3? About the same size as the oem ones
ridiculousnicholasPioneer·Mar 132
0 designs
34
Open
Shifter-to-Handbrake Quick Swap Plate
I don't have room on my rig for both a shifter and a handbrake mounted at the same time. I want a quick-swap plate so I can switch between my Fanatec Shifter V1.5 and a USB handbrake without unscrewing anything The idea: A base plate bolts permanently to the rig's side mount. The shifter and handbrake each get a top plate. The top plate locks onto the base plate with a quarter-turn twist lock or lever clamp (swap in under 10 seconds) Specs: Base plate mounts to standard M6 bolt pattern (the Fanatec side mount has 4× M6 holes, ~50mm × 75mm pattern) Top plate for shifter: matches Fanatec Shifter V1.5 bolt pattern (2× M6, 52mm apart) Top plate for handbrake: universal slotted holes to fit most USB handbrakes (mounting holes vary by brand) Locking mechanism: quarter-turn bayonet twist or lever clamp — must be rigid with zero play (any wobble in a shifter is a dealbreaker) Must handle lateral force up to ~5kg (slamming gears in a race) Material: PETG minimum, ideally designed so the locking surfaces could be reinforced with embedded nuts or metal pins for durability Rally sim racers especially would love this since you need the handbrake for rally games but the shifter for everything else
SimRigStevePioneer·Mar 102
0 designs
28
Open
Button Box Mount for Fanatec QR2 Side Rail
I need a mounting bracket that attaches a custom button box to the side rail of a Fanatec ClubSport QR2 wheel base mount. Most button box mounts out there are designed for profile rigs (8020 aluminum extrusion), but I'm running a Fanatec Cockpit V2 with the proprietary side rails, and there's nothing that fits cleanly The mount should clamp onto the left-side rail (25mm × 25mm square tube with 6mm slot) without drilling, and hold a button box panel up to 150mm × 80mm. It needs to angle ~15° toward the driver so you're not reaching awkwardly mid-race. The clamp should be tool-free (thumb screw) so I can remove it for VR sessions where it gets in the way. Key Requirements: Clamps to 25mm × 25mm square tube rail with 6mm T-slot Tool-free attachment/removal (M5 or M6 thumb screw) Supports panel up to 150mm × 80mm, ~200g max weight 15° inward tilt toward driver Clearance for cables running out the back of the button box Material: PETG or ASA preferred (cockpit sits near a window, PLA would warp in summer heat) Dimensions: Clamp inner: 25mm × 25mm with 2mm wall thickness Arm length: ~60mm from rail center to panel mount surface Panel mounting holes: 4× M3 countersunk, 70mm × 140mm pattern (common for DIY button boxes) Reference: Fanatec Cockpit V2 side rail profile is the same as their monitor mount rail. There are a few universal mounts on Thingiverse but they all wobble because they don't use the T-slot for anti-rotation.
SimRigStevePioneer·Mar 92
0 designs
27